Lifted Predator Ridge Build! *Part 2*

Hey Hey! We are back with this cool build, knocking out some of the last mechanical things and we even started in on the flashy end of things!

Check out what we have been up to!

 

IMG_6069

This week we started in on the 3″ lift kit, here are the A arms ready to be installed

IMG_6070

After greasing the bushings we installed the A arms

IMG_6071

Next we installed the rebuilt steering box

IMG_6072

For the main lighting this cart is getting one of our LED headlights

IMG_6074

Next we installed the rest of the front lift kit

IMG_6076

A set of brand new hubs will keep this cart rolling smoothly

IMG_6075

With the front end complete we moved onto the rear end

IMG_6079

After giving the rear end an overhaul we installed it and the rear lift blocks

IMG_6077

A set of brand new brake pads will get covered up by a pair of freshly machined drums

IMG_6083

This cart is getting some nerf bars

IMG_6084

Here we are fitting them up before we remove them for paint

IMG_0757

Speaking of paint here is the body in epoxy sealer

IMG_0759

After the sealer kicked off we laid down some cool metallic blue

IMG_0760

Then we masked off some tail stripes

IMG_0761

Next it was a metallic charcoal

IMG_0763

How cool is this looking, this paint job is setting the tone for the entire build!

IMG_0769

Taking it to the next level with several coats of clear coat

IMG_6085

What is the upholstery department up to!

 

You will have to come back next week to see the what our upholstery department has up their sleeves with these seats!

Have a look at part one right here!