We are continuing on with our long term SC Carts stretch kit build. We have completed all the floor extension work in this build and we have moved onto seat mounting.
The cart is really coming along well and both of these stretched Precedents are going to be absolutely awesome machines!
With the aluminum floor board formed we moved onto the trim pieces for the sides of the Precedent floor.
Here you can see we cut the Precedent rocker panels/mat retainers.
With the plastic portions cut correctly we started in on the extension pieces. Here you can see we sheared the material for the first rocker panel.
We then took the soon to be Club Car rocker panel and brought it over to the press brake.
With a couple measurements and some bending, the stretch Club Car rocker panels are looking like something.
Here is a set of the formed rocker panels out of the press brake.
The bottom of the Club Car mat retainers.
And voila! They fit like a glove.
Here is a top picture of them.
We also added a couple more stock parts back on the electric Precedent.
With the trim pieces done for the Precedent, we started to tackle the front seat pod.
After measuring, measuring again, and then re measuring we got the front seat pod lined up perfectly so that it is comfortable for both the front and rear passengers.
That is where we end this week. Great progress, and it is looking really awesome.
We can’t wait to keep moving ahead on this cart, and we look forward to building a lot more of these stretches.
Have a look at Part 5 to see how we got to this stage!
Stretch Club Car Precedent!!!